Gap in cantilevered wall

Not sure how to fix this, but I sometimes have a gap under a cantilevered wall. Perhaps the picture can better explain.

According to the Room Specification dialog box, this is supposed to be a stem wall. but it is grayed.

Do you plan to draw a porch or balcony in front of the second floor, front-facing doors? If so that might close that gap over the first floor front door. You cannot manually adjust wall poly-lines in camera views like you can in HD Pro, so were I you, I would carefully check all my default settings per floor and per room dialog box till I found THE settings that are causing the unwanted gaps. With Architectural all you have is settings to guide the software and there are LOTS of settings to check and verify they are correct, one to another.

DJP

Another screen capture from a different angleAttachment 14564

Quote:

---

Originally Posted by David J. Potter

Do you plan to draw a porch or balcony in front of the second floor, front-facing doors? If so that might close that gap over the first floor front door. You cannot manually adjust wall poly-lines in camera views like you can in HD Pro, so were I you, I would carefully check all my default settings per floor and per room dialog box till I found THE settings that are causing the unwanted gaps. With Architectural all you have is settings to guide the software and there are LOTS of settings to check and verify they are correct, one to another.

DJP

---

Thanks David. I closed the gap above the front door by changing the entryway object to an arch type. I'll keep looking for the gap under the hanging wall.

I turned the room type into "SLAB" the problem disappeared. :)