Results 1 to 3 of 3
-
05-12-2010, 06:51 AM #1Registered User
- Join Date
- Mar 2010
- Posts
- 1
Can I isolate a wall in 'framing"?
Using Pro9 and have generated framing,but now want to choose a wall and see just that as a diagram for physically building that section of wall. The 3D is great but is very hard to see specific areas. Have studied other threads and I don't see how to "turn off" all other floor, ceilings and walls under build framing. Also tried going to wall spec.and don't see anything that can be selected. Have gone to edit and can take a picture of the selected wall but where do I paste it? I want to be abl to look at "a framedwall" and See how many studs @ what lenghs and where to mark on the plates.
-
05-12-2010, 06:58 AM #2
Hi Martha,
Turn off layers you don't need. (Tools, Display settings, Display options)
You can export the view "DXF" then import back in and now you will have control of each line.
You can the delete unnecessary lines.
The attached is an example of using that technique.Last edited by GordC; 05-12-2010 at 07:04 AM.
Gord C
Ontario, Canada
Designer
www.crowhurstdesign.ca
Home Designer Pro 8.0 x 2
Home Designer Pro 9.0 x 2
Home Designer Pro 2012 x 1
PC - Windows XP - Intel Pentium Xeon 2.8 Ghz
Seagate 40 GB Drive ST 340014A 320 GB
Monitor (1) AOC 2330V (2) SyncMaster 2233
B.C.I.N 36172 & 40767
"You miss 100% of the shots you don't take" Wayne Douglas Gretzky
-
06-07-2010, 01:22 PM #3Registered User
- Join Date
- May 2010
- Posts
- 21
That is a great tip
Mark
HDPro 9