Results 1 to 6 of 6
Thread: Gap in cantilevered wall
-
04-18-2014, 04:29 AM #1Registered User
- Join Date
- Apr 2014
- Posts
- 11
Gap in cantilevered wall
Not sure how to fix this, but I sometimes have a gap under a cantilevered wall. Perhaps the picture can better explain.
Home Designer Architectural 2014
-- Get your facts first, then you can distort them as you please.
-
04-18-2014, 04:42 AM #2Registered User
- Join Date
- Apr 2014
- Posts
- 11
According to the Room Specification dialog box, this is supposed to be a stem wall. but it is grayed.
Home Designer Architectural 2014
-- Get your facts first, then you can distort them as you please.
-
04-18-2014, 05:17 AM #3
Do you plan to draw a porch or balcony in front of the second floor, front-facing doors? If so that might close that gap over the first floor front door. You cannot manually adjust wall poly-lines in camera views like you can in HD Pro, so were I you, I would carefully check all my default settings per floor and per room dialog box till I found THE settings that are causing the unwanted gaps. With Architectural all you have is settings to guide the software and there are LOTS of settings to check and verify they are correct, one to another.
DJP
David Jefferson Potter
Chief Architect® Teacher, Tutor, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Chief Premier 7-16, Home Designer 7-2014 All Titles
Win7 Ultimate x64 & XP Pro x32 500 gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
3101 Shoreline Drive #2118, Austin, Texas 78728-6929
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel Follow me on Facebook
-
04-18-2014, 05:17 AM #4Registered User
- Join Date
- Apr 2014
- Posts
- 11
Another screen capture from a different angleAttachment 14564
Home Designer Architectural 2014
-- Get your facts first, then you can distort them as you please.
-
04-18-2014, 05:20 AM #5Registered User
- Join Date
- Apr 2014
- Posts
- 11
-
04-18-2014, 05:50 AM #6Registered User
- Join Date
- Apr 2014
- Posts
- 11
I turned the room type into "SLAB" the problem disappeared.
Home Designer Architectural 2014
-- Get your facts first, then you can distort them as you please.