Results 1 to 14 of 14
-
04-19-2014, 01:03 PM #1
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
Full basement and stem walls for garage
I have the house and attached garage that I'm designing pretty well done but when I put in the stairwell some thing was wrong and I figured out that the basement was only 48" or so deep. After I got that corrected to 108" deep basement it wanted to make the garage foundation 108" deep and when I corrected it to 48" it reverted the house basement back to 48". Any ideas?
Last edited by Ross/Kzoo; 04-19-2014 at 05:09 PM.
Home Designer Suite 2014
-
04-20-2014, 05:03 AM #2
Have you set 108" as the default ceiling height for Floor Zero in "Edit - Default Settings - Floor - Structure Tab - Ceiling Height"? This software unerringly follows and only can be counted to follow its "Default Settings" and if they are set differently than what you intend per floor then that is a fundamental error.
DJP
David Jefferson Potter
Chief Architect® Teacher, Tutor, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Chief Premier 7-16, Home Designer 7-2014 All Titles
Win7 Ultimate x64 & XP Pro x32 500 gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
3101 Shoreline Drive #2118, Austin, Texas 78728-6929
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel Follow me on Facebook
-
04-20-2014, 02:16 PM #3
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
Yes, the foundation is now set to 108" and the basement is 108" but the garage foundation is also 108" where it should be about 48" and the is no foundation showing up where the garage joins the house.
Last edited by Ross/Kzoo; 04-20-2014 at 02:25 PM.
Home Designer Suite 2014
-
04-20-2014, 05:36 PM #4
Registered User
- Join Date
- Nov 2009
- Location
- Ohio
- Posts
- 138
Me thinks you need to delete the entire foundation and rebuild it.
Is the garage designated as a 'garage' in the room dbx? If not, do that first.
Then Build / Floor / Foundation. When the foundation defaults box pops up, set your wall height to what you want.
Does that make a difference?
You will find information in your reference manual regarding 'Foundations / foundations and rooms'.JoAnn
HD Architectural 10
HD Suite 6 & 7
-
04-21-2014, 04:25 AM #5
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
Can you delete just the foundation and then rebuild it or does everything have to start from scratch?
Home Designer Suite 2014
-
04-21-2014, 06:24 AM #6
Open your plan. Go to the foundation level, then to Build>Floor>Delete Foundation and click Enter.
BB Boy (Bob E)
Home Designer Pro 10
Home Designer Pro 7.08a
Home Designer Pro 6.04
Home Designer Suite 7
Picture Painter Home & Landscape
Nashville-TN
“ The nicest thing about the future is that it always starts tomorrow”
-
04-21-2014, 06:25 AM #7
Registered User
- Join Date
- Nov 2009
- Location
- Ohio
- Posts
- 138
Just the foundation.
Build / Floor / Delete FoundationJoAnn
HD Architectural 10
HD Suite 6 & 7
-
04-21-2014, 12:18 PM #8
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
It seems that this is all I can come up with. The square area to the left is the garage and the outside garage walls should only be ~ 40" tall.
Home Designer Suite 2014
-
04-21-2014, 11:13 PM #9
Is this what you are looking for?
Basically a lot of niggling around with the values
in the "Room Specification" dbxs. SWT (Stem
Wall Top), floor to SWT, Stem Wall height, etc.Home Designer Pro 2014
Don't kill your ideas.... Execute them.
-
04-22-2014, 03:09 AM #10
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
Almost, The wall height in house and garage is correct but the top of the foundation and stem wall in garage need to be the same elevation.
BTW Thanks for all the posts!Last edited by Ross/Kzoo; 04-22-2014 at 04:07 AM. Reason: Thank You
Home Designer Suite 2014
-
04-22-2014, 08:10 AM #11
Registered User
- Join Date
- Nov 2009
- Location
- Ohio
- Posts
- 138
Garage wall.
JoAnn
HD Architectural 10
HD Suite 6 & 7
-
04-22-2014, 11:01 AM #12
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
JoAnn, that's correct. How do you get there with an existing main level floor plan?
Home Designer Suite 2014
-
04-22-2014, 12:59 PM #13
Registered User
- Join Date
- Nov 2008
- Posts
- 185
make sure the garage room is specified as a Garage on the Room's General Tab and on the Structure tab check the box for Slab foundation under this room ( usually 6" thick in a garage around here) , and the rest of the house should be set in the Floor defaults to 108" and set the other sizes as needed eg 24 " wide footing not 16 " as per default per code in your Area, then build the foundation, you may need to delete the existing foundation and start again to get it to generate right. Deleting wont effect the rest of the floors.
Think you have Suite ,when I had V.8, it wouldn't show foundations in Elevation/cross sections incase you run into that issue too..
M.Mick
HD Pro 10.4.3.5
Arch. HD 9.6
HD Suite 8.5
-
04-22-2014, 01:50 PM #14
Registered User
- Join Date
- Apr 2014
- Location
- Richland Mi.
- Posts
- 29
Thanks to all. I think I've got it, the key was "monolithic slab". By doing that I'm guessing that it didn't associate with the garage with the basement walls.
Home Designer Suite 2014