Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2006
    Posts
    1

    Split level

    Supposedly one floor of a plan can be designed lower than another floor according to Help as follow:

    Floor Height specifies the ground level of the floor. This is useful in designing split-level homes. The default is 0, but you can specify a negative number to make the floor lower in one room than another. When you set this value, the Ceiling Height value automatically updates to keep the ceiling level across the plan.

    However, trying to show living area rooms 24" higher than the garage cannot be accomplished - either by increasing living area rooms (+24) or decreasing (-24) the garage.

    So...how is this done?

  2. #2
    Join Date
    May 2004
    Location
    Narrow, winding road.
    Posts
    406
    Quote Originally Posted by LaNaStL
    However, trying to show living area rooms 24" higher than the garage cannot be accomplished - either by increasing living area rooms (+24) or decreasing (-24) the garage.
    Sure it can. The current design I am working on has the living room 24 inches higher than the garage. The living room is at zero and the garage floor is at -24.

    Take a look at the screen capture I have attached. It is for the garage. Note that the Stem Wall Top (A) is at -12 and the floor is 12 inches below that, which means it is 24 inches below the zero reference (conveniently, the living room default is at the zero reference). Note also, Floor to Stem Wall Top (F) is a positive number, as it is measured from the floor up. Not intuitive, I know, but it works once you understand it.

    This is from HD PRO 7. If you have a different product, you may have somewhat different dialog settings, but the principle should be the same.

    BTW, this is for a garage that is taller than the residential standard, so don't let the other dimensions throw you.

    Also, it is always a good idea to mention which product and version number you are using.

    Hope this helps.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ScreenShot001A.jpg 
Views:	456 
Size:	82.0 KB 
ID:	309  
    Last edited by RootFarm; 03-30-2006 at 04:08 PM.

  3. #3
    Join Date
    Feb 2004
    Posts
    692
    Make sure you remove the (D) - it stands for default and if present will cause the default value to be used instead of the one you typed.
    Dan Park
    Customer Support Manager
    Chief Architect, Inc

 

 

Posting Permissions

  • Login or Register to post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •