Results 1 to 3 of 3
Threaded View
-
10-21-2008, 04:19 AM #3
First of all, I would like to compliment Chief Architect for the great follow-up, technical support, and patience!
The reason for this post is two fold:
1) To thank Chief Architect for the great tech. support
2) To provide an explanation to the "dormer issue", in case any other users are having the same problem.
Issue summary:
I create two dormers in two adjacent rooms. But......every time I close and re-open the file/application, the following errors occur:
1) The dormer windows are automatically re-sizing.
2) The dormer windows are no longer centered.
3) The rooms with the dormers will lose their settings (moldings, wall/ceiling color, room label
1) Prior to building the dormers, un-check "Auto Rebuild Roofs"
2) Create the dormer
3) Once the dormer is just the way you want it, click "Explode Dormer" (remember, you cannot "un-explode" the dormer once you have "exploded" it!)
I realize that this solution is not ideal/perfect, however, in my case, it seems to work like a charm.
Hope this helps.
Otto