Trouble adding "dormer"

[rfcomm2k]

Not sure what you mean by roof settings displayed, but here are two screenshots. The image7 pict is how I originally drew the plan based on dimensions provided by homeowner. The image8 pict is the same plan with a modification to it showing the 6' bump out. This bump out is shown in the pix of my original post.

The pix below are of the floorplan for the "2nd floor" or what the homeowner is currently calling the attic. This space will become a master bedroom suite.

Although my drawing of the bump out (image8) shows a substantial attic space where bump out is, in reality the rafters from the original roof extend to the floor of the attic here, meeting the floor at the outside wall of bump out. The main roof extends over the front porch and ends at the outside wall of the bump out.